Hardwired installations
Mount weather-proof charging units on garage walls or driveways, hardwired for maximum charging speeds.
- 48A charging capacity
- Weather-tight conduits
- Pedestal mounting runs
- Wi-Fi commissioning
Serving Fairfield County, Connecticut
EV charger installations across Fairfield County
Wake up fully charged every morning.
Install a dedicated Level 2 vehicle charging circuit and wall-mounted charging station tailored to your garage or driveway.
Licensed Connecticut electricians
Wall-mounted charging stations
Tesla Wall Connector configurations
Dedicated 240V circuit additions
State Registered Contractor: CT HIC.0705773
Level 2 chargers · Hardwired installations · 240V circuits · Load management
EV charging
Home charging should be fast and simple.
We plan the charger wiring, mounting, and breaker loads to match your vehicle's capabilities and your home's electrical capacity.
Plug-in receptacles
Install heavy-duty NEMA 14-50 receptacles for plug-in charging cords, backed by dedicated safety breakers.
- NEMA 14-50 outlet runs
- 40A charging circuits
- GFCI safety breakers
- Portable cord mounts
What EV setup do you need?
Provide details about your car model and where you park. The electrician will handle panel checks.
Install garage EV charger
Mount outdoor driveway charger
Run NEMA 14-50 receptacle
Install dual charger setup
Hardwire customer-supplied charger
Run conduit for future EV
Install load management circuit
Convert NEMA plug to hardwire
EV installation sequence
Three steps to home charging.
Review panel capacity
We perform load calculations to verify if your existing 200A service has room.
Run 240V circuit
Install heavy-gauge copper wiring, conduit paths, safety disconnect, and mount charger.
Commission & test
Power up the unit, verify charging speed, program Wi-Fi controls, and complete inspections.
Ready to charge at home?
Request a home charger estimate.
Provide your vehicle model, panel photos, and preferred parking layout to schedule installation.
Distance from main panel to chargerMethod of mounting (wall vs pedestal)Concealed wall routing or trenchingElectrical panel capacity statusMunicipal permit and local inspection fees
EV Charger Installation across Fairfield County towns
EV Charger Installation requests accepted for residential, commercial, HOA, and estate properties across lower Fairfield County.
Fairfield
Town center + Southport + Greenfield Hill
Remodeling, electrical, HVAC, handyman repairs
Westport
High-end residential + coastal
Design-build, estate care, mechanical upgrades
Greenwich
Estate properties + second homes
Property care, smart home integration, masonry
Darien
Coastal + suburban premium
Renovations, backup power, custom millwork
Easton
Large wooded lots + rural suburban
Excavation, system upgrades, emergency drying
New Canaan
Upscale residential
Home automation, custom remodeling, structural care
Weston
Wooded + private lots
General plumbing, painting, framing, roofing
Norwalk
Mixed residential + commercial
Commercial maintenance, systems engineering
Trumbull
Suburban family homes
Fixture replacement, siding, painting, carpentry
Wilton
Upscale suburban
Automation, HVAC venting, custom decks, repairs
Direct answers
Questions homeowners ask before moving forward
Clear answers help you decide whether the next step is a fit. Project-specific facts are confirmed during review and documented before work begins.
How fast will a Level 2 charger charge my car?
A typical Level 2 charger adds about 25 to 35 miles of range per hour, fully charging most EVs overnight.
Do I need to upgrade my electrical panel for an EV charger?
Not always. If your panel has sufficient capacity (often 200A), a standard circuit can be added. If capacity is limited, a panel upgrade or load-management device may be required.
Can the EV charger be installed outdoors?
Yes, NEMA 3R or NEMA 4 rated chargers are fully weatherproof and engineered for outdoor driveway installations.
Do you supply the EV charger?
We install customer-supplied chargers (such as ChargePoint, Wallbox, or Emporia) or can recommend and supply compatible hardware.
Is a permit required for an EV charger?
Yes, adding a dedicated 240V circuit requires an electrical permit and inspection from your local CT municipality.
Schedule EV charger installation.
Detail your vehicle, charger type, parking setup, and preferred install location.
Step 1 of 4Service
1
2
3
4
What do you need help with?
Choose one or more. You can change this later.